Channel presses are isolated into box-type channel presses and plate-and-casing channel presses as indicated by the various constructions of the channel chamber.
I. Activity necessities
1、Checking issues prior to beginning the machine
Check whether the water driven station framework and other gear are in great working condition; check whether the fluid level of the slurry barrel comes to above 60%; check whether the 4 rollers of the head wheel have even contact with the track and move openly; check the oil and snugness of the footing chain; check whether the two pulling snares run simultaneously and regardless of whether the activity of the pulling snare is adaptable and dependable.
2、Caution in activity
Gradually and discontinuously raise the taking care of strain to the functioning tension; check whether all the coal cakes on the channel fabric are tidied up; forestall the dry coal mud from hindering the delta of the channel plate; notice the functioning state of the channel press and helper hardware whenever.
Continuously check the oil level and oil nature of the water driven station, check whether there is spillage in the water driven chamber, and supplant the seal ring assuming there is oil spillage.
Continuously check whether the channel plate is broken and regardless of whether the bolts fixing the ears are free and cracked, assuming any issue is found, supplant and manage it on schedule.
When emptying the cake, one should check whether the channel fabric is broken, assuming it is broken, it ought to be supplanted on schedule; furthermore, check the fixing elastic around the channel plate, on the off chance that it is truly matured or harmed, it ought to be supplanted on schedule.
The sliding track of the channel plate and the transmission filter press machine manufacturers chain ought to be kept clean and often greased up with oil to decrease the obstruction of the sliding channel plate and expand the help life of the chain.
Continuously check and change the snugness of the chain on the two sides so the snugness is reliable.
Check the spring, pin and other wearing parts in the snare box often, and supplant them assuming they are harmed.
When stacking the channel fabric, the crease strips at the highest point of each channel plate ought to be stumbled with one another to keep up with the seal between the channel plates. While appending the clasp belt, forestall the clasp belt from squeezing into the fixing surface of the channel plate.
Set up a few electromagnetic turning around valve loops for opportune substitution in the event of burnout.